1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 270Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 270

DRC3464 Manual ReleaseUP 1You can manually raise the engine in both trim and tilt rangesOpen the manual release valveturn
final position (up into the tilt range, if necessary) Close the manual release valveManually, push the gearcase in (or down)
until it is supported by the trim systemOpen the manual release valve only enough to let the engine trim in to desired position
ill suitable hoist or engage either its tilt support or trailering bracketDo not attempt to hold the engine up by closing
the manual release valveThe engine must be held manually, and lowered to the trim range manually, after it has been tilted
up manuallyThe motor can drop to the trim range if the support is removedClose the manual release valve firmlyThe manual
release valve must be closed to enable the trimtilt unit to function I.A To tilt engine UPOpen manual release valve as instructed