1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 278Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 278

Power Supply Troubleshooting Refer to POWER TRIM 'N TILT foldout at rear of manualBefore beginning this procedure: Charge
remove relays from relay sockets4Connect voltmeter red lead to V1 and black lead to V2 If no voltage at V1check red wire
between starter solenoid terminal and relay socketsIf red wire is OK, check black wire between relay sockets and engine ground
If voltage at V1 go to Step 5I 5Connect voltmeter black lead to clean engine ground, and voltmeter red lead to V3 (bluewhite)6Push
control box UP trim button If no voltage at V3, check control box trim switch and wiring, and go to Step If voltage at V3,
go to Step 77Push lower otor cover UP trim button If no voltage at V3, check for voltage at bluewhite bullet connector out