1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 291Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 291

12Place cylinder body in vise, as shown1141 13Using OMC Tilt Cylinder End Cap Removerl lnstaller, PIN 326485, or OMC Universal
piston off the rodRemove the piston O-ring and the rod O-ring Remove the four valve assemblies, which consist of springplungerand
check ball All four plungers and check balls are identicalThree of the springs are one length, the fourth spring is shorterUpon
reassembly, the shorter spring can be positioned in any hole in the pistonReassemble the piston by placing one ball, one