1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 292Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 292

21 22882 dPry the O-ring out of the end capDiscard the O-ringeRemove the outside O-ring Discard the O-ringClean the end cap
end cap onto the rodRemove any lubricant from the threads on the rod, prime with OMC Locquic Primer, and let drySlide the
piston assembly onto the rodPlace new rod O-ring over the threadsjClean any thread locking material from the threads on the
inside of the nutSpray threads of nut with OMC Locquic Primer, and let dryApply small amount of OMC Nut Lock to threads of
nutSlide the washer over the threads and install the nuttorque to 58-87 ftIbs(79-118 Nm)kInspect both rod end bushings and