1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 298Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 298

Trim Sending Unit Adjustment 1Tilt the engine and engage the mooring bracketf11 2Temporarily, install PIN 387278 thrust rod
the engine up and adjust the sending unit by pivoting it up or down6Lower the engine against the thrust rod to verify adjustmentRepeat
Step 5, if necessary7After adjustment is correct, tilt the motor up, tighten the two sending unit screws, and remove the
thrust rod ill limiter rod must be installed and in the same location as it was when the motor was brought in for serviceLeaving