1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 302Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 302

Trim-OUT Tilt-UP Mode When operating the hydraulic unit in the Trim-OUTlTilt-UP mode, hydraulic fluid is routed in the following
pumpIt is important to note that all fluid on the return path returns to the pumpBecause the trim and tilt rods displace
fluid at the top of the cylinders, the fluid returning to the pump through the reverse lock check is not sufficient to supply
the pump, so additional fluid is drawn from the reservoir5When both the trim and tilt rods are fully extended and the pressure
exceeds 1500 psi (10500 kPa), the trim-up relief valve will open, directing the fluid to the reservoir6When the hydraulic
unit is trimming outtilting up or when the engine is running in forward gear, the following valves must hold pressure: Tilttrim