1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 324Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 324

1731 1741 1751 52Remove and discard the seals from the trim pistons53Using OMC Trim Sleeve Remover, PIN 325065, pry the Carefully
excess solvent from the internal passages with compressed airIt is essential that the manifold and all components be kept
absolutely clean and dust freeAny dirt in the system could cause scoring of cylinder bores, sticking of valves, or damage
to pump componentsAssembly Use only OMC Power TrimlTilt and Power Steering Fluid or GM Dexronautomatic transmission fluid
to fill the hydraulic system 1Oil and install both trim sleevesThe seals of the sleeves must face downWhen installing, press
the sleeves to the bottom of the bore as far as they will goThe top of the sleeves will almost reach the bottom of the threads