1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 330Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 330

Trim Sending Unit Adjustment It might be necessary to adjust the trim sending unit to coincide with the trim gauge at full
only snug, so the sending unit can be pivoted5Lower the engine all the way down against the angle adjusting rod 13435 6Observe
the trim gaugeIf the needle does not show center positionadjust the sending unit by pivoting it up or down with screwdriver,
until the gauge shows the needle in the center position7Raise the engine and tighten the sending unit screwsLower the engine