1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 37Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 37

Preseason Service 1Check gearcase lubricationIf leakage is evident, gearcase seals may need attentionCheck lubricant level
terminals to check battery conditionInstall and connect battery4Reconnect spark plug leads ill sure the steering, shift,
and throttle systems are attached to the engine using the special locknuts and lockbolts stored with the engine earlierFollow
the manufacturer's installation instructions! If control systems are attached to the engine using the wrong fasteners or
assembled carelessly, sudden unexpected loss of engine control may result6Test engine warning hornSee Warning Hornthis section
5When engine is reattached to the boat's transom, make 7For models withif the oil hose has been disconnected, the oil line
must be purged and the system primed before an}:: attempt is made to start the engineRefer to Section 2, Installation RecommendationsAny
time the VRO oil supply line has been disconnected from the engine, you must run 50:1 fueloil mixture in the fuel tank for