1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 81Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 81

3Anti-Siphon Valvesafety standards require permanently installed fuel systems to have anti-siphon protectionThis protection
for V4 and smaller engines, while minimum of 516 in(7,9 mm) is requiredDistribution lines must be USCG Type "A 1" or "81"Vinyl
hose must not be used in permanently installed fuel distribution system5Fuel Distribution Fittingsall fittings must have
an inside diameter of: V4, V6in(6,4 mm) minimum, 932 in(7,1 mm) preferred in(7,1 mm) minimum 6Fuel Filterfuel filters must
have pressure drop of no more than 0.4 inof mercury (Hg) at flow rate of 20 gallons per hourThe filter should have minimum
filtered area of 200 square inches (1290 cm 2) OMC Fuel Filter Kit, PI 174176, meets these requirements7Fuel System PrimingOMC
Electric Fuel Primer Kit, PIN 174651, is available for built-in fuel systemsThe kit mounts near the fuel supply and, when