1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 94Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 94

6 Assembly When assembling the fuel piston, always install new washer and stem in addition to other new parts requiredBe
piston onto stem with clockwise rotationPush poppet valve in (toward the stem) to hold the screw in place while turningTighten
turn past point of contact outer lip of fuel piston in its groove in intermediate housingoil piston with oil pump bore and
install inlet housingInstall Torx screws and tighten 18 turn past point of contact?uter lip .of air motor piston in its groove