1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 98Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 98

Primer System Servicing Function Test 1Start engine and allow it to reach normal operating temperatureSet engine speed at
isopropyl alcohol rn 4Press lightly on the syringe plunger: If fluid moves through the fitting, it is okay rn If fluidCleaning
Tool, PINthrough the fitting, clean it with does not move OMC 326623Solenoid Removal]1Remove the two bracket screws and washersRemove
the primer solenoid[] 2Carefully remove the three hoses and disconnect the bullet connectorsInspection]1To test the solenoid