1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 102Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 102

8Carefully, remove the fuel hoses and remove the carburetor assemblyDisassembly [] 1Discard the O-ring seal between the
plate and discard the plate gasket7Remove the intermediate circuit air bleed orifice with OMC Driver, PIN 31700239591 8Remove
the slow speed needle and spring from the throttle bodyInspection 1Inspect carburetor main body and float chamber: Gasket
surfaces must be smoothno nicks or irregularities All nozzles and pickup tubes must be securely in place All metal orifice
inserts must be securely in place2Thoroughly clean components with OMC Carburetor and Choke Cleaner Do not clean carburetor