1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 103Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 103

3Flush all carburetor holes and passages with small syringe filled with isopropyl alcoholBlow passages and carburetor dry
body and throttle shaft: Check body and shaft for excessive wear or side play Check throttle plates for looseness or incorrect
seatingMaximum throttle plate clearance is 0.002 in(0,05 mm) Check throttle plate retaining screws for tightness l1ID 6Remove
calibration pocket cover and gasket from throttle body: Check the pocket for damage or contamination Check calibration holes