1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 105Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 105

124111Install new O-ring seal, and attach main body to throttle bodyTorque mounting screws in "X" pattern to 45-55 inIbs(5-6
tie straps 1251 3Position carburetor and engage throttle shaft connector li nk(s) 1261 4Install two nuts and two screws per
carburetor, and tighten in an "X" pattern to 120-144 inIbs(14-16 Nm)1271 5Route and connect all primer hosesRefer to Hose
Routing Chart, this section All fuel and primer hoses must be routed correctly to ensure proper fuel delivery and prevent