1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 140Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 140

Stator Servicing Removal ill starting while servicing engine '" Twist and remove all spark plug leads to avoid accidental
head and its retaining screws2Install the stator and route the leads f313Use only patch lock screws to retain the statorReplace
any patch lock screw that has lost its locking featureApply OMC Locquic Primer, then OMC Nut Lock, to threads of screws 4Tighten
all screws to torque of 120-144 inIbs(14-16 Nm) 5Attach stator and power coil leadsV4Coat final connectors with OMC Neoprene
Dip6Refer to Flywheel Servicing for correct flywheel installation procedure7Route and connect charge coil lead{s)1597 f'N=J