1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 175Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 175

7 DR4750 Ohmmeter TestDiode and Connectors Note All ohmmeter tests must be performed with the engine not running1Calibrate
the other direction indicates diode is good If your test results are different, replace diode or repairreplace engine wiring
harnessf715Connect ohmmeter red lead to blackyellow terminal in engine harness connector Connect black meter lead to blackyellow
terminal "B" in 2-pin Amphenol connector: Meter must show low resistance If your test results are different, repair or replace
engine wiring harnessrJl6Connect ohmmeter red lead to blackyellow terminal in engine harness connector Connect black lead
to engine harness end of 1-pin Amphenol shift switch connectorNote reading high reading in one direction and low reading