1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 201Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 201

'sl9Tilt statorcharge coil assembly and pulley to remove three retaining screws, power steering reservoir to cylinder block
housing to powerhead V4-V6four screws and one nut on each side vafive screws and one nut on each side 112114At the rear,
remove two screws and one nut, powerhead to exhaust adapterr:;3l15Securely fasten OMC Lifting Eye, PIN 396748, to crankshaft
threads and lift powerhead with suitable hoist A complete powerhead weighs approximately 370 Ibskg)To avoid instability,
be sure hoist has capacity of at least 1000 Ibs(454 kg) 16Remove all carburetion, ignition, and electrical components from