1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 205Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 205

1201 20Using an appropriate bearing separator, support the lower bearing and press it off the crankshaftIf the lower main
pistonsDiscard the rings 25( 25Using toql as drawn on Page 4-6, or OMCRetaining Ring Pliers, PIN 325937, remove all wrist
pin retaining ringsDiscard retaining rings 1261 26Support pistons in OMC Piston Cradle, PIN 326572, and remove wrist pins
with OMC Driver, PIN 3967471271 27Be careful notto lose any ofthe 33 needle bearings or the two wrist pin washersIf ANY of
the bearings are worn or lost, replace ALL 33 needle bearings during reassemblyPrior to inspection and assembly, thoroughly