1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 214Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 214

f31l38Tighten the rod cap screws to torque of 25-30 inIbs(2-3 Nm)39Apply light coat of outboard lubricant to the corners
rodcrankpin diameter Note The proc.e?ure must be followed to assure frame is squarely In position 134140Tighten the forcing
screw to torque of 23 in Ibs(2,5 Nm)41Loosen both rod ca screws 114 tu rn21605 135142Apply preliminary torque of 40-60 inIbs(5-7
Nm) to both rod cap screws 43Apply final torque of 42-44 ftIbs(57-60 Nm) in two alternate increments to both rod cap screws
44Loosen forcing screw and remove the frame Repeat Steps 38 thru 43 for remaining connecting rods36145Thoroughly clean and