1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 215Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 215

47Apply OMC Gel-Seal II to the crankcase mating flange of the cylinder blockThe application must cover the flange evenly
1401 49Install main bearing screws finger tight 50When the crankcase is seated, install and firmly seat the crankcase taper
pin51Torque main bearing screws in stages to 28-32 ftIbs(38-43 Nm)Begin with the center screws and work outward in spiral
pattern52Install the crankcase flange screws and torque to 60-84 inIbs(7-9 Nm) 14311441 53Apply OMC Locquic Primer and OMC
Nut Lock to the upper and lower crankcase head screws and install themTorque them to 72-96 inIbs(8-11 Nm)54Connect all crankcase