1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 256Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 256

Exhaust Housing ServicingV4 Removal 1Remove powerhead as described in Section 42Remove gearcase as described in Section 6
and two rear screws, adapter to outer exhaust housingRemove the one nut at rear of adapterf412Loosen and remove the upper
mount plate screws and remove the mount plate3Lubricate the upper mount with soapy water and pry up to remove it from the
adapter housing4Separate the adapter from the outer exhaust housing'5l5Mark the water tube for correct assembly locationRemove