1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 258Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 258

15 f1518Clean and degrease the adapter housing and outer exhaust housing mating surfaces with OMC Cleaning SolventApply OMC
washer under the forward starboard screwf17l12Align the outer exhaust housing and adapter by placing two powerhead mounting
screws through their holesr:s8l13Torque the four mount plate screws to 22-24 ftIbs(30-33 r,gl14Torque the small adapter to
exhaust housing screws and nut to 60-84 inIbs(7-9 Nm)15If removed, coat the lower mounts with soapy water and press into
the exhaust housingNotice one side is identified "OUT i and torque them to 150-180 inIbs(17-20 Nm) 16Install the lower mount
coversInstall the screws Replace any lock patch screw if its locking feat ure becomes weakDefinite resistance to tightening