1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 298Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 298

Gearcase Servicing Removal '" 1Avoid accidental starting of motorDisconnect the charge coil connectors between stator assembly
not fully supporting the engine's weightEngine might drop unexpectedly to its trimmed out positionTo avoid personal injury,
always support the engine's weight with suitable hoist or the trailering arms during service6Remove the gearcase assembly
from the exhaust housing, being careful not to bend the shift rodThe lower inner exhaust housing may come out with the gearcaseSecure
the gearcase in suitable holding fixture1sl7Remove and discard the O-ring from the top of the driveshaft Under some full
tilt conditions or periods where the en- In preparation for gearcase disassembly, remove the water pump as described in Water