1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 301Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 301

COA3126 11Reach inside the gearcase and remove the pinion and pinion nutRemove any loose needle bearings that might interfere
groove 15Push the clutch dog pin out with small screwdriver and separate the propeller shaft from the forward bearing housing
and remove the clutch dog from the propeller shaftDiscard the clutch dog pin retaining spring COB3109 16Remove the forward
gearthrust bearingand thrust washer from the forward bearing housing and clean and inspect the partsRemove the 25 forward
gear needle bearings from the bearing housing 1251 126 17Push downward on the dete.nt lever that the shift rod was threaded
into until it "snaps" into its lowest position, then remove the shifter shaft and cradle 18Slide out the shift lever pin23