1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 306Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 306

Driveshaft Shimming Tool, PIN 393185 The driveshaft pinion is precisely meshed with the forward and reverse gears by the
shimmed length of the driveshaft INote Before assembling the tapers on both parts pinion to the driveshaft, degrease IJJ
1Assemble the driveshaft bearing housingthrust wash- erthrust bearingand pinion onto the driveshaftUse OMC Driveshaft Seal
Protector, PIN 318674, whenever installing or removing the bearing housinglightly coat the threads of the pinion nut with
outboard lubricant and tighten to 100-110 ft.lbs(136-149 Nm) 2Use OMC Gauge, PIN 330224, and OMC Collar, PI 341440 rn 3Slide
the bearinghousingdriveshaft with large end in the collar onto the contact with rn tighten preloadthe assembled driveshaft