1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 310Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 310

12 12308 COA3568 16Locate the propeller shaft assembly and orient the forward bearing housing with the detent lever toward
f13118Apply OMC Gasket Sealing Compound to both sides of a new shift rod cover gasket Position the gasket on the gearcaseInsert
the shift rod and cover assembly into the gearcase as shown, and thread the shift rod into the detent lever about four turns19Move
shift rod from side to side while pushing on the propeller shaft to ensure proper alignment of the bearing housing locator
pin into the locator pin hole in the gearcaseTap the end of the propeller shaft with plastic or rawhide mallet to fully seat
the bearing housing 114120Apply OMC Gasket Sealing Compound to the threads of the shift rod cover screwsInstall the screwsTighten