1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 317Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 317

Gearcase ServicingCounter-Rotation Removal INote Remove the Page 6-29 (V8)Disassembly gearcase as described on Page 6-11
lubricant will give it milky appearanceOverheating will give the lubricant black color and burned odor[]] 3Remove the two
screws, washers, and retainers holding the propeller shaft bearing housing 4Thread OMC Adapter, PIN 432398onto OMC Slide
Hammer, PIN 432128until it seatsThread adapter completely onto propeller shaft and pull propeller shaft and bearing housing
assembly out of gearcase5Remove the four driveshaft bearing housing screws with washers COA3155 []] 6Pull up on the shift
rod to engage the clutch dog into FORWARD gear positionThis will provide necessary clearance to remove the pinion nut[] 7Remove
the pinion nut from the bottom of the driveshaft by using OMC Driveshaft Holding Socket, PI 311875and OMC Pinion Nut Holder,