1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 322Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 322

11If removed, install new forward gear bearingApply OMC Needle Bearing Assembly Grease to 25 new rollersInstall the rollers
makes contact with the flange on the housingThe indicator needle must be parallel with the side of the gear housing and perpendicular
to the table surfaceZero the dial indicator19Grip the bearing housing 1800 apart and pull up to get reading on the indicatorTo
determine thickness of shims, use the following example: 0.030 in of shims in the assembly0.020 inyour reading on the dial
indicator 0.010 indifference innecessary end play 0.011 inrequired shims 20Remove the 0.030 in of shims from the assemblyReassemble