1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 329Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 329

va f41 6Lightly coat the detent ball and spring with OMC Needle Bearing Assembly GreaseFirst, insert the spring in the housingthen
housing Depress the ball and spring with punch while pushing the detent lever into the housingOnce the detent lever is past
the ball, rotate the lever toward the rear of the housing, then move the detent lever to engage NEUTRAL position r:;J 101
9V6Place the cradle on the shift shaftthen rest the shifter on the cradle Slide the shaft into the housing and insert the
shifter tip into the detent's pocketInstall the pivot pin 1nl 10V8Face the narrow arms of the shifter toward the bearing