1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 331Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 331

18Press the detent lever down to engage REVERSE (lowest) positionThis will provide clearance to install the clutch shaft
help with OMC Triple-Guard greaseInstall the a-rings into the shift rod cover 1221 22Place the shift rod grommet and shift
rod spacer on the shift rodGrease the threaded end of the shift rod and insert it through the coverTurn the shift rod while
pushing it through the cover to avoid damaging the a-ringsnew shift rod cover gasket Position the gasket on the gearcaseThread
the shift rod into the detent lever about four turns 231 23Apply OMC Gasket Sealing Compound to both sides of a 24Move shift
rod from side to side while pushing on the clutch shaft to ensure proper alignment of the bearing housing locator pin into