1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 359Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 359

126 9Lightly coat the gear housing bearing with OMC Extreme Pressure GreaseLightly coat the driven gear with OMC Triple-Guard
pinion housing screws and lock washersTorque the screws to 60-84 inIbs(7-9 Nm)'31l 14Install the bracket as shownApply OMC
Nut Lock to the thru-boltsInstall the nuts and torque to 50-65 inIbs(5,6-7,3 Nm)15To test the assembly and operation of the
starter, refer to No load Current Draw, Electric Starter testInstallation 1Apply OMC Locquic Primer and OMC Nut Lock to the
threads of the four mounting screwsPosition starter and install the mounting screws and lock washers132 2First, tighten the
top two screws, then the bottom two screws, to torque of 14-16 ftIbs(19-22 Nm)3Attach the battery negative cable and harness