1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 399Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 399

7 DR2186 13264 [[] 9Install locknut on pivot boltReplace the locknut if you do not feel definite resistance to tighteningTorque
the locknut to 10-12 ftIbs(14-16 Nm)14If removed, install the port and starboard lower engine coversInstall the hose support
bracket to the starboard cover halfIf removed, secure the steering hoses every in(152 mm) with OMCTie Straps, PIN 91006815Fill
the steering reservoir with fresh OMC Power TrimlTilt and Power Steering Fluid or Dexron I and install the dipstick16Remove
the emergency stop switch cap and operate the starter while turning steering wheel from lock to lock17Recheck the reservoir
fluid level and fill as necessaryTorque the dipstick to 50-60 inIbs(6-7 Nm)18Recheck the reservoir fluid level after 10 minutes