1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 413Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 413

Tilt-DOWNTrim-IN Mode 1When the DOWN button is pressed, the trimtilt motor rotates counterclockwise (as viewed from the pump
the top of the trim cylinders 5Fluid from the bottom of the cylinders returns through the open UP check valve to the pump6In
the tilt range, all of the fluid from the bottom of the tilt cylinder returns through the UP check valve to the pumpSince
more fluid is returning to the pump than is required to fill the top of the cylinder, the excess fluid is vented through
the DOWN relief orifice to the reservoir7In the trim range, fluid from the bottom of all the cylinders is routed to the pump,
which feeds only the top of the tilt cylinderAll of the excess fluid vents through the DOWN relief orifice to the reservoirBWhen