1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 416Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 416

DRC3464 Manual ReleaseUP 1You can manually raise the engine in both trim and tilt rangesOpen the manual release valveturn
the desired final position (up into the tilt range, if necessary)Close the manual release valveManually, push the gearcase
in (or down) until it is supported by the trim systemOpen the manual release valve only enough to let the engine trim in
to desired position ill suitable hoist or engage either its tilt support or trailering bracketDo not attempt to hold the
To tilt engine UPOpen manual release valve as instructed aboveTilt engine up and hold it with engine up by closing the manual
release valveThe engine must be held manually, and lowered to the trim range manually, after it has been tilted up manuallyThe
motor can drop to the trim range if the support is removedClose the manual release valve firmlyThe manual release valve must