1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 428Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 428

Relay Ohmmeter Tests L!J bracket will vary from model to model, but the relay terminals r;] The orientation and location
an ohmmeter calibrated on high ohms scale or continuity light to test continuity2Connect meter leads to relay terminals "B-"
and "M" The meter must show continuityDR3950 I] 3Connect meter leads to relay terminals "B+" and "M" The meter must show
no continuityf41 4Calibrate ohmmeter on appropriate scale and connect the leads to the two relay "S" terminalsTo avoid immediate
meter damage, never apply an ohmmeter to an electrical circuit where voltage is present The meter must show 70-100 ohmsDR3950