1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 438Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 438

1sl 5Remove the reservoir -ring from the cylinder bodyCheck machined surfaces for nicks and scratchesr::;l 6Using mm hex
and inspect the motor a-ring and the -ring on the cable connectorr,Ql 9Remove the three Allen head screws securing the pump
manifold assembly to cylinder body IT!] 10Check machined surface on base for nicks and scratchesIndividual parts in the pump
manifold assembly are not available separatelyDo not remove the pump or any control valves from the bodyDo not lose the pump