1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 440Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 440

dPry the O-ring out of the end capDiscard the O-ringeRemove the outside O-ring Discard the O-ringClean the end cap thoroughlyfLubricate
the inside surface of the end cap and use OMC Tilt Cylinder Seal Protector, PIN 326005to slide the end cap onto the rod iRemove
any lubricant from the threads on the rod, prime with OMC Locquic Primer, and let drySlide the piston assembly onto the rodPlace
new rod O-ring over the threadsjClean any thread locking material from the threads on the inside of the nutSpray threads