1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 448Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 448

Description of Operation r:jl The power trimtilt unit consists of manifold that contains all valving, oil reservoir, oil
the trim-up relief valve opens automatically, lowering the motor to the fully trimmed out positionAttempts to tilt the motor
when operating over 1500 RPM will have no effectOperation of the unit in the down direction is the opposite of movement in
the up directionThe tilt cylinder moves first until the swivel bracket is resting on the trim rods, which then begin to move
The motor can be raised or lowered through the tilt range manually without electrical assistance using the manual release
valve on the starboard side of the un itThere is screwdriver access hole in the stern bracket The slotted valve can be opened
to allow oil to flow from one side of the ilt cylinder to the otherThe manual release valve must not be opened more than
one and one-half turnsThe manual release valve must be closed to reactivate the motor's shock absorption system and reverse
thrust capability f21 trim gauge is provided with the motorA sending unit is attached to the port stern bracketIt is accessible