1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 465Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 465

18 COA2431 COA2433 eOil and install new a-ring and scraper CD in the end capThe scraper is installed with the lip facing
inside of the nutSpray threads with OMC Locquic Primer and let dryApply small amount of OMC Nut Lock to the threads of the
nutSlide the washer CD over the threadsInstall the nutTighten the nut to torque of 58-87 ftIbs(79-118 Nm)If for some reason
the rod has been unscrewed from the eyelet, clean the threads of the rod at that end and the threads inside the eyelet with
OMC Locquic PrimerApply small amount of OMC Nut Lock to the threads, thread the rod into the eyelet, and torque both the
nut and the rod into the eyelet at the same time11V6, COA2435 Service the piston and rod assembly: aClamp the rod tightly