1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 471Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 471

67 COA2478 COA2479 COA2480 dLubricate a-rings of check valve to be tested and install valve in OMCTester, PIN 390063Torque
the same smooth flat tool, remove the a-ring from the end capsDiscard the a-ringsClean both end caps and scrape all corrosion
or loose paint from the threads in the outside a-ring area169143There are two differenttypes of seals in the trim end capsThe
one pictured on the left is an a-ring 0The one pictured on the right is quad-ring The quad-ring is used for service70144Oil
new quad-ring and install in the groove in the trim end capsOil and install new scraper To aid in the installation of the
scraper, warm the scraper in hot waterrril45Oil new outside a-ring and back-up ring Install them on the trim end capsThe
back-up ring goes on top17246Remove both trim pistons and rod assemblies from the manifoldTo remove, pull outward on the