1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 472Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 472

73 173147Remove and discard the seals from the trim pistonsCarefully clean the trim pistons and rods and install new sealstrim
excess solvent from the internal passages with compressed airIt is essential that the manifold and all components be kept
absolutely clean and dust freeAny dirt in the system could cause scoring of cylinder bores, sticking of valves, or damage
to pump components Assemblv Use only OMC Power TrimlTilt and Power Steering Fluid or GM Dexronautomatic transmission fluid
to fill the hydraulic system rv must and install both triminstalling,The seals sleevessleeves 1Oil sleevesof the face downWhen
press the to the bottom of the bore as far as they will goThe top of the sleeves will almost reach the bottom of the threads