1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 474Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 474

r,v If' i the valve all the way into the manifoldTighten the 11Oil and install the manual release valve Thread valve to torque
the three screws evenly so that the plate does not become cockedTighten the screws to torque of 25-30 inIbs(2,8-3,4 Nm)15Clean
the oil reservoirInstall new a-ring on the reservoirf15116Position the oil reservoir on the manifoldInstall the three retaining
screws with lock washersTighten the three screws securelyf'16l17Oil the components of the expansion relief valveUsing your
thumb, press the valve seat CD and -ring into the manifoldThen, press the valve core Q) and a-rings into the seatInsert the
spring into the valve corer:t7l18Insert the trim-down pump relief valve and spring into the manifold in the position shownr:t7l19a