1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 475Get this manual

1995 Johnson/Evinrude Outboards 125-300 90 degree LV Service Manual, Page 475

COA2503 f18120Inspect the rubber keeper The rubber keeper provides cushion between the motor on the pump drive coupling and
fill the cavity where the pump is mounted, up to the top of the filterr:;:;] 24Using screwdriver, rotate the pump coupling
several turns clockwise and then several turns counterclockwise until no more air bubbles come out of the pumpIt is very
important that the pump area be filled with oil and purged of air because the pump could be damaged if installed dryr:;:;]
25Clean the bottom of the motor where it engages the manifoldInstall new O-ring on the motorPosition the motor on the manifold
and install the three screws and lock washersTighten the screws securely r:;:;-l 26V4Mount the bottom flat end of the tilt