1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 28Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 28

Off-Season Storage Use the following procedure to properly prepare Johnson and Evinrude outboards for extended periods of
of fuel Two quarts of CJv1C Storage Fogging Oil One pint of Evinrude or Johnson Outboard Lubricant 2112 ozof CJv1C 2+4 fuel
conditioner 4Connect the tank containing the "storage mixture" to the engineRun the engine on the "storage mixture" at approximately
1500 RPM for five minutes INote DO NOT disconnect fuel line or run oil mixing unit equipped engines out of fuelDisconnecting
fuel line while engine is running could cause excessive oil consumption and eventual hard starting5Stop engine and remove
all spark plugsSpray liberal amount of aJIC Storage Fogging Oil into the spark plug holes6Turn flywheel in clockwise direction
to distribute the fogging oil throughout the cylindersInstall and torque the spark plugs Prevent accidental starting during
storage; leave spark plug leads off all of the spark plugs 8If engine is equipped with portable fuel tank, disconnect fuel