1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 38Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 38

Set Timing Pointer INote If the timing pointer bracket has been disturbed, check the t iming pointer alignment1Remove the
contact with the piston 5While holding the piston firmly against the piston stop tool, make mark on the flywheel inline with
the timing pointer 6Turn the flywheel in clockwise direction until the piston contacts he tool againMake second mark on the
flywheel inline with the timing pointerRemove the piston stop tool [[] 7Use the molded-in marks to find the midpoint between
marks and Place mark at this location [[] 8Rotate the flywheel clockwise to line up mark with the timing pointerHold the