1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 60Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 60

Function Test Two tests must be conducted to ensure proper fuel deliveryThe first test will check the suction pumps' ability
fitting and the suction pump2Start motor and observe gaugePump vacuum gauge should read no more than in(102 mm) of mercury
(Hg)3If fuel pump does not meet these specifications, replace it When installing new fuel pump, apply ONIC Nut Lockto threads
of screwsInstall screws and torque to 24-36 inIbs(2,8-4,0 Nm)Pressure Pu mp Test rn 1Remove pressure fuel pump to in-line
fuelbetweenhosefilter the Connect fuel pressure gauge (obtain locally) pressure fuel pump and the in-line fuel filter2Start
motor and observe gauge Pump pressure should read minimum of PSI (21 kPa)3If pressure fuel pump does not meet these specifications,