1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 62Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 62

5To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite and black leads
fittings [] 7To inspect or replace internal components, remove the four solenoid cover screws[] 8When assembling solenoid,
back out screws in their holes to engage original threadsthen, tighten securelyInstallation 1Attach purplewhite leads and
three hosesSecure large hose with tie strap2Install solenoid and bracketPosition ground lead under the inside bracket screw