1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 71Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 71

Turn carburetor body upside down and hold so gasket surface is horizontalThe weight of the float will close the float valve
correct operation of the carburetorWith carburetor body in normal running position, the float must drop open to dimension
shownTo adjust, bend tab on float arm where tab contacts float seat Base of carburetor body Bend float lever tab to achieve
proper dimension into 13a in(25-35 mm) 7Place the lower gasket into the float chamberInstall the float bowl and bowl gasketTighten
the screws to torque of 17-19 inIbs(1 ,9-2,1 Nm), following sequence embossed on float chamber8Install the carburetor body
cover and gasketTighten the screws to torque of 17-19 inIbs(1,9-2,1 Nm), following sequence embossed on cover9Install the