1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 73Get this manual

1995 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 73

Carburetor Mixture Adjustment 1Start the engine and run it in FORWARD at one-half throttleAllow the engine to reach normal
in gear near full throttle for one minuteQuickly reduce speed to SLOW (700-800 RPM) and shift into NEUTRALThe engine should
continue to run smoothly7If he engine stalls or pops, the mixture is too leanTurn the needle counterclockwise 1 16 turnAllow
15 seconds after each adjustment for the engine to respondRepeat Step to verify that the mixture adjustment is correct8If
the engine does not respond to adjustments, check it for other problemsMake sure gasoline is of good quality and mixed with
the proper amount of oil as you face the steering handle, turn the idle speed adjustment knob counterclockwise to full SLOW